This page gives a brief list of our most popular USB cables.
These cables can be purchased by visiting our onine shop using the link in the left column.
Motherboard USB header to 2 internal devices cable
These cables allows you to connect internal USB devices to the USB pin header on your motherboard. Cables are 55cm long.
Can be used to connect either:-
Suitable for all motherboards and devices that use standard USB pin headers.
Suitable for devices that require male or female cable termination.
Can also be used as an extension cable.
Internal Motherboard or USB Card header to device cable
This cable can be used to connect a single device to the USB pin header found on most motherboards and some USB PCI cards. Cables are 55cm long.
Can be used to connect :-
Suitable for all motherboards and devices that use standard USB pin headers.
Suitable for devices that require male or female cable termination.
Uses only one row of 5 pins on the motherboard USB header leaving one row free for other devices.
Internal to external USB cable - USB A to internal 5 pin USB header
These cables can be used to connect internal USB devices to standard USB A sockets. Cables are 60cm long.
Can be used to connect :-
Suitable for all devices that use standard 5 pin USB pin headers.
Suitable for devices that require male or female cable termination.
Two cables can be used to connected USB units with 8, 9 or 10 pin headers.
Motherboard USB pin header to USB B plug adaptor cable
These cables can be used to connect devices with USB B type sockets to the motherboard USB pin header. Cables are 60cm long.
Can be used to connect:-
Suitable for all motherboards and devices that use standard USB pin headers.
Uses only one row of 5 pins on the motherboard USB header leaving one row free for other devices.
A version of this cable with a mini B connector is also available. Please visit our on-line shop for details.
Motherboard USB pin header to USB A female socket adaptor cable
These cables convert one row of pins on the motherboard USB pin header into a female USB A type socket. Cables are 60cm long.
Allows you to install memory sticks, USB hubs etc inside the PC case.
Can be used to connect :-
Suitable for all motherboards and devices that use standard USB pin headers.
Uses only one row of 5 pins on the motherboard USB header leaving one row free for other devices.
Extension cable for motherboard USB pin header
These cables allow you to extend the reach of the motherboard USB pin header. Cables are 33cm long.
Useful when connecting the front panel USB ports in large cases or when the cables supplied with a USB device are too short.
Suitable for all motherboards that use standard USB pin headers.
USB A to 10 pin adaptor cable
This adaptor cable will convert TWO USB A type sockets into a 10 pin header.
One end of the cable has two USB A plugs. These can be plugged into any USB A sockets on your system or a standard USB Hub.
The other end of the cable has a 10 pin header. The cables from your internal USB devices can be connected to this header.
The adaptor cables are USB 2.0 and approximately 24cm (9.5 inches) long.
These cables are designed for use in situations where your USB devices already have cables and you just need an extra pin header adaptor to connect them.
If you do not have cables for your devices you should consider our USB A to pin header cables which are long enough to connect your devices directly to a spare USB A socket on your system.
USB A to Pin header adaptor kit for internal USB hubs
This adaptor kit is designed to allow USB hubs to be used inside your PC case. The kit will convert 4 USB A type sockets into two 10 pin headers.
Important A USB hub IS NOT included with this kit. You will need to supply your own USB hub.
The kit includes two USB A plug to 10 pin header adaptor cables. Each adaptor cable has two USB A plugs at one end and a 10 pin header at the other. The USB A plugs are plugged into the USB A sockets on your UsB hub. Your USB device cables can then be connected to the pin header at the other end of the adaptor cable.
Also included is a 4/5 pin header to USB A socket adaptor cable. This can be used if you want to connect your USB hub to the USB pin header on your motherboard. Note if you already have a device connected to this pin header it would be necessary to remove this to fit the adaptor cable.
Top of page